Injin Yankan Laser Tare da Teburin ɗaga Wutar Lantarki
Saukewa: MJG-13090SG
Gabatarwa:
- 1300mm×900mm (51"×35") girma tebur
- Teburin ɗaga Motoci.Teburin ɗagawa yana zuwa 150mm (6 ″)
- CO2 gilashin Laser tube 80 watts ~ 150 watts
- Zaɓuɓɓukan tebur na zuma da wuka
- Chiller, compressor & shaye fan an haɗa
JG13090SG mai tsada neCO2 Laser abun yanka da engraverwanda ya zo cike da fasalulluka masu sauƙin amfani don sa aiki ya zama iska.
JG13090SG ya zo tare da tsarin layin dogo na jagora na musamman don ƙara daidaito da tsawon rai, shugaban mai da hankali ta atomatik da ƙari.Tare da bututun Laser 150W cushe a ciki, wannan injin ba shi da matsala da acrylic mai kauri, MDF ko wasu kayan.
Abubuwan Na'ura
Masana'antar Aikace-aikace
Ya dace da acrylic, itace, balsa, plywood, veneer, kwali, takarda, filastik, fata, roba, kumfa, EVA da sauran kayan da ba ƙarfe ba.
Ana amfani da talla, sana'a, samfuri, kayan ado, kayan daki, masana'antar tattara kaya, da sauransu.
Ma'aunin Fasaha na Injin Yankan Laser Laser JG-13090SG
| Model No. | Saukewa: JG-13090SG |
| Nau'in Laser | CO2 DC gilashin Laser tube |
| Ƙarfin Laser | 80W / 110W / 130W / 150W / 300W |
| Wurin aiki | 1300mm×900mm (51.1"×35.4") |
| Teburin aiki | Teburin aiki na zuma / tebur mai aiki da wuka |
| Wurin ɗaga wutar lantarki mai aiki: 0 - 150mm | |
| Gudun Yankewa | 0 - 24,000mm/min |
| Matsayi daidaito | ± 0.1mm |
| Tsarin motsi | Motar mataki |
| Tsarin sanyaya | Ruwan sanyi mai yawan zafin jiki |
| Tsarin cirewa | 550W ko 1100W Exhaust fan |
| Mai hura iska | Mini air compressor |
| Tushen wutan lantarki | AC220V± 5% 50/60Hz |
| Ana Tallafin Tsarin Zane | PLT, DXF, AI, BMP, DST, da dai sauransu. |
| Girman waje | 2150mm×1930×1230mm |
| Cikakken nauyi | 500Kg |
| Zabuka | Tsarin mayar da hankali ta atomatik, na'urar zana rotary, Servo motor |
Goldenlaser MARS Series CO2 Laser Systems Summary
Ⅰ.Injin Yankan Laser tare da Tsarin ɗaga Tebu
| Model No. | Laser shugaban | Wurin aiki |
| Saukewa: JG-10060SG | Kai daya | 1000mm × 600mm |
| Saukewa: JG-13090SG | 1300mm × 900mm |
Ⅱ.Injin Yankan Laser Tare da Teburin Aiki na Zuma
| Model No. | Laser shugaban | Wurin aiki |
| Saukewa: JG-10060 | Kai daya | 1000mm × 600mm |
| Saukewa: JG-13070 | Kai daya | 1300mm × 700mm |
| JGHY-12570 II | Dual kafa | 1250mm × 700mm |
| Saukewa: JG-13090 | Kai daya | 1300mm × 900mm |
| MJG-14090 | Kai daya | 1400mm × 900mm |
| MJGHY-14090 II | Dual kafa | |
| Saukewa: MJG-160100 | Kai daya | 1600mm × 1000mm |
| MJGHY-160100 II | Dual kafa | |
| MJG-180100 | Kai daya | 1800mm × 1000mm |
| MJGHY-180100 II | Dual kafa |
Ⅲ .Laser Yankan Machine tare da Conveyor Belt
| Model No. | Laser shugaban | Wurin aiki |
| Saukewa: MJG-160100LD | Kai daya | 1600mm × 1000mm |
| MJGHY-160100LD II | Dual kafa | |
| Saukewa: MJG-14090LD | Kai daya | 1400mm × 900mm |
| MJGHY-14090D II | Dual kafa | |
| Saukewa: MJG-180100LD | Kai daya | 1800mm × 1000mm |
| MJGHY-180100 II | Dual kafa | |
| Saukewa: JGHY-16580 | Kawu hudu | 1650mm × 800mm |
Abubuwan da ake buƙata da Masana'antu
Ya dace da acrylic, itace, faranti biyu masu launi da sauran kayan da ba na ƙarfe ba.
Ana amfani da talla, sana'a, samfuri, kayan ado, kayan daki, da sauransu.
Da fatan za a tuntuɓi goldenlaser don ƙarin bayani.Amsar ku na tambayoyi masu zuwa za su taimake mu bayar da shawarar injin da ya fi dacewa.
1. Menene babban abin da ake buƙata na sarrafa ku?Laser yankan ko Laser engraving (alama) ko Laser perforating?
2. Wani abu kuke buƙatar aiwatar da laser?
3. Menene girman da kauri na kayan?
4. Bayan sarrafa Laser, menene za a yi amfani da kayan aiki?(Masana'antar aikace-aikacen) / Menene samfurin ku na ƙarshe?
5. Sunan kamfanin ku, gidan yanar gizonku, Imel, Tel (WhatsApp / WeChat)?
