CCD Laser Cutter maka Labelụ kpara akpa, akwa akwa
Nọmba nlereanya: ZDJG-9050
Okwu mmalite:
Igwefoto laser na-abịa na igwefoto CCD etinyere n'isi laser.Enwere ike ịhọrọ ụdị njirimara dị iche iche n'ime ngwanrọ maka ngwa dị iche iche.Ọ dabara adaba maka patches na ịcha akara.
Nke aIgwefoto CCD laser cutteremebere ya nke ọma maka ikwado akpaaka na igbutu akara dị iche iche nke akwa na akpụkpọ anụ dị ka akara akwa, akwa akwa, baajị na ihe ndị ọzọ.
Ngwanrọ nwere ikike nke Goldenlaser nwere ụzọ njirimara dị iche iche, ọ nwere ike idozi ma kwụọ ụgwọ eserese ahụ ka ịzenarị mgbanaka na akara ndị na-efunahụ ya, na-eme ka ọ dị elu na nke ziri ezi ịkpụcha akara ngosi zuru oke.
Tụnyere ndị ọzọ CCD igwefoto cutters laser n'ahịa, ZDJG-9050 dabara adaba maka ịkpụ aha na nkọwa doro anya na obere size.N'ihi usoro mmịpụta n'ezie, enwere ike mezie ma bepụ akara dị iche iche nwere nkwarụ, si otú a na-ezere njehie ndị na-esi na aka aka aka.Ọzọkwa, enwere ike ịgbasa ya na nkwekọrịta dị ka contour amịpụtara, na-ewepụ mkpa ọ dị ịme ndebiri ugboro ugboro, na-eme ka ọrụ ahụ dịkwuo mfe ma melite arụmọrụ.
Isi atụmatụ
Nkọwapụta
| Mpaghara ọrụ (WxL) | 900mm x 500mm (35.4" x 19.6") |
| Tebụl na-arụ ọrụ | Tebụl na-arụ ọrụ mmanụ aṅụ (Static / Shuttle) |
| Ngwa ngwa | Ngwa CCD |
| Ike laser | 65W, 80W, 110W, 130W, 150W |
| Isi iyi laser | CO2 DC iko laser tube |
| Usoro ngagharị | Nzọụkwụ moto / Servo moto |
| Ịnye ọkụ | AC220V± 5% 50/60Hz |
| Akwadoro usoro eserese | PLT, DXF, AI, BMP, DST |
| Mpaghara ọrụ (WxL) | 1600mm x 1000mm (63" x 39.3") |
| Tebụl na-arụ ọrụ | Nbufe tebụl ọrụ |
| Ngwa ngwa | Ngwa CCD |
| Ike laser | 65W, 80W, 110W, 130W, 150W |
| Isi iyi laser | CO2 DC iko laser tube |
| Usoro ngagharị | Nzọụkwụ moto / Servo moto |
| Ịnye ọkụ | AC220V± 5% 50/60Hz |
| Akwadoro usoro eserese | PLT, DXF, AI, BMP, DST |
Ngwa
Ngwa ndị ọdabara
Akpụkpọ anụ, akpụkpọ anụ, akwa a kpara akpa, akwa e biri ebi, akwa a kpara akpa, wdg.
Ụlọ ọrụ ọdabara
Uwe, akpụkpọ ụkwụ, akpa, akpa, ngwaahịa akpụkpọ anụ, akara a kpara akpa, akwa akwa, ngwa ngwa, mbipụta akwa na ụlọ ọrụ ndị ọzọ.
Nka na ụzụ Parameters nke CCD igwefoto laser ọnwụ igwe
| Nlereanya | ZDJG-9050 | ZDJG-160100LD |
| Ụdị laser | CO2 DC iko laser tube | |
| Ike laser | 65W, 80W, 110W, 130W, 150W | |
| Tebụl na-arụ ọrụ | Tebụl na-arụ ọrụ mmanụ aṅụ (Static / Shuttle) | Nbufe tebụl ọrụ |
| Mpaghara ọrụ | 900mm × 500mm | 1600mm × 1000mm |
| Sistemụ ngagharị | Nzọụkwụ moto | |
| Usoro jụrụ oyi | Chiller mmiri na-ekpo ọkụ mgbe niile | |
| Ụdị eserese akwadoro | PLT, DXF, AI, BMP, DST | |
| Ịnye ọkụ | AC220V± 5% 50/60Hz | |
| Nhọrọ | Onye na-eme ihe ngosi, sistemụ ndokwasa ntụpọ uhie | |
Goldenlaser zuru oke nke sistemu igbupu laser ọhụụ
Ⅰ Smart Vision Dual Head Laser Cutting Series
| Nlereanya Mba. | Mpaghara ọrụ |
| QZDMJG-160100LD | 1600mm × 1000mm (63"×39.3") |
| QZDMJG-180100LD | 1800mm × 1000mm (70.8 "× 39.3") |
| QZDXBJGHY-160120LDII | 1600mm × 1200mm (63"×47.2") |
Ⅱ Usoro ịkpụcha ọsọ ọsọ na-efe efe
| Nlereanya Mba. | Mpaghara ọrụ |
| CJGV-160130LD | 1600mm × 1300mm (63"×51") |
| CJGV-190130LD | 1900mm × 1300mm (74.8 "× 51") |
| CJGV-160200LD | 1600mm × 2000mm (63"×78.7") |
| CJGV-210200LD | 2100mm × 2000mm (82.6"×78.7") |
Ⅲ Mbelata nkenke dị elu site na akara ndebanye aha
| Nlereanya Mba. | Mpaghara ọrụ |
| JGC-160100LD | 1600mm × 1000mm (63"×39.3") |
Ⅳ Ultra-Large Format Laser Cutting Series
| Nlereanya Mba. | Mpaghara ọrụ |
| ZDJMCJG-320400LD | 3200mm × 4000mm (126 "× 157.4") |
Ⅴ CCD Igwefoto Laser Cutting Series
| Nlereanya Mba. | Mpaghara ọrụ |
| ZDJG-9050 | 900mm × 500mm (35.4 "× 19.6") |
| MZDJG-160100LD | 1600mm × 1000mm (63"×39.3") |
| ZDJG-3020LD | 300mm × 200mm (11.8 "× 7.8") |
Ngwa ndị ọdabara
Akpụkpọ anụ, akpụkpọ anụ, akwa a kpara akpa, akwa e biri ebi, akwa a kpara akpa, wdg.
Ụlọ ọrụ ọdabara
Uwe, akpụkpọ ụkwụ, akpa, akpa, ngwaahịa akpụkpọ anụ, akara a kpara akpa, akwa akwa, ngwa ngwa, mbipụta akwa na ụlọ ọrụ ndị ọzọ.
Biko kpọtụrụ goldenlaser maka ozi ndị ọzọ.Azịza gị nke ajụjụ ndị a ga-enyere anyị aka ịkwado igwe kacha dabara adaba.
1. Gịnị bụ isi nhazi gị chọrọ?Laser ọnwụ ma ọ bụ laser osise (akara) ma ọ bụ laser perforating?
2. Kedu ihe dị mkpa iji mee ka usoro laser?
3. Gịnị bụ nha na ọkpụrụkpụ nke ihe?
4. Mgbe emechara laser, gịnị ka a ga-eji mee ihe?(ụlọ ọrụ ngwa) / Gịnị bụ ngwaahịa ikpeazụ gị?
5. Aha ụlọ ọrụ gị, weebụsaịtị, Email, Tel (WhatsApp / WeChat)?
Nọmba nlereanya: MJG-160100LD / MJGHY-160100LDII
Onye isi otu / isi okpukpu abụọ nwere eriri ihe na-ebugharị
Nọmba nlereanya: CJGV-160130LD
