Igwe na-egbutu laser maka akwa akwa akwa
Nọmba nlereanya: JMCZJJG(3D) -250300LD
Okwu mmalite:
- Ngwakọta nke nnukwu usoro X, Y axis laser ọnwụ (trimming) na nnukwu ọsọ Galvo laser perforating (oghere ịkpụ laser).
- Laser perforating edo obere oghere na kacha nta size nke 0.3mm.
- Usoro mmepụta akpaaka na nri, ebufe na sistem ikuku.
- Ultra-ogologo usoro nhazi site n'ihu nke he kwere omume.
Lelee igwe na-egbutu laser maka akwa akwa na-arụ ọrụ!
Uru nke Laser Cutting Fabric Duct
Laser Cutting Air duct
Njirimara igwe
Goldenlaser pụrụ iche mepụtara CO2 laser ọnwụ igwe maka textile ducts
| Sistemu Galvo - Nlekwasị anya dị omimi | |
| Ihe nyocha Galvanometer | SCANLAB (Germany) |
| Mpaghara nyocha | 450mm × 450mm |
| Nha ntụpọ Laser | 0.12mm ~ 0.4mm |
| Ọsọ nhazi | 0 ~ 10,000mm / s |
Otu n'ime ụlọ ọrụ nhazi nke ndị ahịa anyị nwere ikuku ikuku
- Igwe eji egbutu Laser nke Goldenlaser na-arụ ọrụ
Nka nka
| Ụdị laser | CO2 RF metal laser |
| Ike laser | 150 watt, 300 watt |
| Mpaghara ọrụ (W×L) | 2500mm × 3000mm (98.4" × 118") |
| Tebụl na-arụ ọrụ | Vacuum ebu table na-arụ ọrụ |
| Mechanical usoro | Servo moto, Gear & Rack chụpụrụ |
| Ịnye ọkụ | AC220V± 5% 50/60Hz |
| Akwadoro usoro eserese | PLT, DXF, AI, BMP, DST |
| Nhọrọ | Onye na-enye nri akpaaka, Sistemụ ntinye ntụpọ uhie, Sistemụ akara |
※Enwere ike ịhazi mpaghara ọrụ na arịrịọ.
Ụdị tebụl dị iche iche dị: 1600mm × 1000mm (63 "× 39.3"), 1700mm × 2000mm (67 "× 78.7"), 1600mm × 3000mm (63 "× 118"), 2100mm × 2000mm (82.6") ma ọ bụ nhọrọ ọzọ.
| Nkọwa nke igwe na-egbutu laser maka eriri akwa | |
| Ụdị No. | JMCZJJG(3D) -250300LD |
| Ụdị laser | CO2 RF metal laser |
| Ike laser | 150 watt, 300 watt |
| Mpaghara ọrụ (W×L) | 2500mm × 3000mm (98.4" × 118") |
| Tebụl na-arụ ọrụ | Vacuum ebu table na-arụ ọrụ |
| Sistemụ perforation | Sistemụ Galvo |
| Usoro ịkpụ | XY Gantry ịkpụ |
| Ịcha ọsọ | 0 ~ 1200mm / s |
| Osooso | 8000mm / s2 |
| Mechanical usoro | Servo moto, Gear & Rack chụpụrụ |
| Ịnye ọkụ | AC220V± 5% 50/60Hz |
| Akwadoro usoro eserese | PLT, DXF, AI, BMP, DST |
| Nhọrọ | Onye na-enye nri akpaaka, Sistemụ ntinye ntụpọ uhie, Sistemụ akara |
※Enwere ike ịhazi mpaghara ọrụ na arịrịọ.
Dị iche iche table nha dị: 1600mm × 1000mm (63 "× 39.3"), 1700mm × 2000mm (67 "× 78.7"), 1600mm × 3000mm (63 "× 118"), 2100mm × 2000mm (82.6" × 78 nhọrọ) ọzọ.
| Ụdị ihe atụ nke Goldenlaser nke igwe na-egbutu laser maka ákwà mmepụta ihe | |
| Usoro nke JMCZJJG | Usoro JMCJG |
| Gantry & Galvo Laser | Flat Bed Laser Cutter |
| |  |
| Ụlọ ọrụ Ngwa na Ngwa |
| Ụlọ ọrụ ọdabara |
| Ngwunye akwa akwa (ụkwụ ikuku ventilashị, sọks ikuku, ikuku ikuku, sọks mmiri, eriri mmiri, eriri mmiri, sọks, sọks, akwa ikuku akwa, nkesa ikuku) |
| Ngwa ndị ọdabara |
|
Ihe nlere anya ịcha akwa akwa nke laser
Biko kpọtụrụ GOLDEN LASER maka ozi ndị ọzọ. Azịza gị nke ajụjụ ndị a ga-enyere anyị aka ịkwado igwe kacha dabara adaba.
1. Gịnị bụ isi nhazi gị chọrọ? Laser ọnwụ ma ọ bụ laser osise (akara) ma ọ bụ laser perforating?
2. Kedu ihe dị mkpa iji mee ka usoro laser?
3. Gịnị bụ nha na ọkpụrụkpụ nke ihe?
4. Mgbe emechara laser, gịnị ka a ga-eji mee ihe? (ngwa) / Gịnị bụ ngwaahịa ikpeazụ gị?
5. Aha ụlọ ọrụ gị, weebụsaịtị, Email, Tel (WhatsApp…)?
Nọmba nlereanya: JMCJG-350400LD
