Mpempe akwụkwọ CO2 Gantry na Galvo Laser Cutting Machine

Flatbed CO2 Gantry na Galvo Laser Cutting Machine

Nọmba nlereanya: JMCZJJG(3D)-130250DT

Okwu mmalite:

Gear-rack ụgbọala.
Ihe osise Galvo dị elu & ịcha gantry axis XY.
Ihe osise laser buru ibu, na-egbutu ma na-egbutu ihe niile n'otu.
CO2 RF metal laser 150W / 200W / 300W / 400W / 500W / 600W

Nnukwu usoro Flatbed CO2 Gantry na Galvo Laser Cutting Machine

Ụdị NO.: JMCZJJG(3D)-130250 / 210310

Igwe laser a na-ejikọta ọrụ laser abụọ, usoro XY axis gantry maka ịkpụcha nkenke na usoro galvanometer maka ihe osise. Usoro abụọ a na-ekekọrịta otu tube laser. Usoro abụọ a nweere onwe ha ịtụgharị.

3D ike osise technology na-aghọta na kasị otu ihuenyo kanye usoro nke 400mm × 400mm na zuru okè splicing nke nnukwu ụkpụrụ.

GOLDEN LASER JMC Series High-Precision High-Power Laser Cutting System na nkọwa.

Gear & Rack Drive dị elu

Ịcha ọsọ ruo 1200mm / s, osooso ruo 8000 mm / s2, na-ejigide nkwụsi ike ogologo oge.

Isi ọnwụ laser pụrụ iche

Kwesịrị ekwesị maka ịkpụ ígwè na ihe ndị na-abụghị ígwè, ngwaọrụ na-elekwasị anya na-akpaghị aka maka ịcha ihe dị iche iche ọkpụrụkpụ.

Knife warara tebụl na-arụ ọrụ

Na-ebelata ebe kọntaktị nke ọma na ihe a ga-edozi, si otú ahụ na-ebelata ihe ngosi nke laser iji hụ na nhazi nke ọma.

Laser CO2 nke ụwa

Isi iyi laser CO2 metal RF kacha mma n'ụwa, kwụsiri ike ma dịgidere.

Usoro iyuzucha na-esochi

Mmetụta dị mma na-ekpochapụ na obere ike oriri.

Smart nesting ọrụ

Na-eme ka ojiji nke nhazi ihe dịkwuo mma.

Japan Yaskawa Servo moto

Oke nkenke, ọsọ na-agba ọsọ kwụsiri ike, ibu siri ike, ịrị elu mkpọtụ mkpọtụ dị ala.

Nka nka

Ụdị laser	CO2 RF metal laser tube
Ike laser	150W / 200W / 300W / 400W / 500W / 600W
Mpaghara ọrụ	1300mm × 2500mm / 2100mm × 3100mm
Tebụl na-arụ ọrụ	Eriri panel na-arụ ọrụ table
Nhazi ọsọ	Enwere ike idozi
Tinyegharịa izi ezi n'ọkwa	± 0.1mm
Sistemụ ngagharị	Sistemụ njikwa Servo na-anọghị n'ịntanetị, draịva Gear-rack
Usoro jụrụ oyi	Chiller mmiri na-ekpo ọkụ mgbe niile
Ịnye ọkụ	AC220V± 5% 50/60Hz
Ụdị eserese akwadoro	AI, BMP, PLT, DXF, DST, wdg.

Ụdị igwe Laser emetụtara

Gear & Rack Drive	Ụdị No.	Mpaghara ọrụ
Gantry na Galvo Laser Sistemu	JMCZJJG(3D) -210310DT	2100mm × 3100mm (82.6in × 122in)
Gantry na Galvo Laser Sistemu	JMCZJJG(3D) -130250DT	1300mm × 2500mm (51in × 98.4in)
Gantry XY axis Laser Sistemu	JMCJG-210310DT	2100mm × 3100mm (82.6in × 122in)
Gantry XY axis Laser Sistemu	JMCJG-130250DT	1300mm × 2500mm (51in × 98.4in)