Mochini oa ho betla oa CO2 Gantry le Galvo Laser Cutting
Nomoro ea Mohlala: JMCZJJG(3D)-130250DT
Selelekela:
- Ho khanna ka rack ea gear.
- Ho betla Galvo ka lebelo le phahameng le ho seha gantry ka axis ya XY.
- Ho betla ka laser sebakeng se seholo, ho ntsha dikoti le ho seha tsohle ka ho le leng.
- Laser ea tšepe ea CO2 RF 150W / 200W / 300W / 400W / 500W / 600W
Mochini o Moholo oa ho Ngola oa CO2 o Behiloeng ka Flatbed le Galvo Laser Cutting
Sistimi ea ho Seha Laser e Matla a Phahameng ea GOLDEN LASER JMC Series ka Lintlha tse qaqileng
Ho khanna ka Gear & Rack ka nepo e phahameng
Lebelo la ho seha ho fihlela ho 1200mm/s, ho potlakisa ho fihla ho 8000 mm/s2, ho boloka botsitso ba nako e telele.
Hlooho e khethehileng ea ho itšeha ka laser
E loketse ho seha tšepe le thepa e seng ea tšepe, sesebelisoa sa ho tsepamisa mohopolo o ikemetseng bakeng sa ho seha thepa e fapaneng ea botenya.
Tafole ea thipa e sebetsang
Ho fokotsa ka katleho sebaka seo thepa e lokelang ho sebetsanoa le sona, ka hona ho fokotsa ponahatso ea laser ho netefatsa ts'ebetso e sebetsang hantle.
Lesetara ea CO2 ea maemo a lefats'e
Mohloli o ka sehloohong oa CO2 tšepe RF laser lefatšeng, o tsitsitseng ebile o tšoarella.
Sistimi ea ho ntša mosi ka mor'a ho latela
Tšusumetso e ntle ea ho ntša mosi le tšebeliso e nyane ea matla.
Mosebetsi o bohlale oa ho haha sehlaha
E ntlafatsa haholo tšebeliso ea lisebelisoa tsa ho sebetsana le lintho.
Enjene ea Servo ea Japane ea Yaskawa
Ho nepahala ho hoholo, lebelo le tsitsitseng la ho matha, ho jara boima bo feteletseng, ho phahama ha mocheso o tlase lerata.
Li-parameter tsa Tekheniki
| Mofuta oa laser | CO2 RF tšepe laser tube |
| Matla a laser | 150W / 200W / 300W / 400W / 500W / 600W |
| Sebaka sa ho sebetsa | 1300mm × 2500mm / 2100mm × 3100mm |
| Tafole ea ho sebetsa | Tafole ea ho sebetsa ea phanele ea Strip |
| Lebelo la ho sebetsa | E ka fetoloa |
| Pheta ho nepahala ha boemo | ± 0.1mm |
| Sistimi ea ho falla | Sistimi ea taolo ea Servo e sa sebetseng, drive ea Gear-rack |
| Sistimi ea ho pholisa | Mocheso o sa khaotseng oa metsi a batang |
| Phepelo ea motlakase | AC220V±5% 50 / 60Hz |
| Liforomo tsa litšoantšo lia tšehetsoa | AI, BMP, PLT, DXF, DST, jj. |
Mefuta ea Mochini oa Laser e Amanang
| Ho khanna ka li-gear le li-rack | Nomoro ea Mohlala | Sebaka sa ho sebetsa |
| Sistimi ea Laser ea Gantry le Galvo | JMCZJJG(3D)-210310DT | 2100mm × 3100mm (82.6in × 122in) |
| JMCZJJG(3D)-130250DT | 1300mm × 2500mm (51in × 98.4in) | |
| Sistimi ea Laser ea Gantry XY axis | JMCCJG-210310DT | 2100mm × 3100mm (82.6in × 122in) |
| JMCCJG-130250DT | 1300mm × 2500mm (51in × 98.4in) |
Sebaka sa ho sebetsa se ka etsoa ka mokhoa o ikhethileng ho latela tlhoko ea hau.
Thepa le indasteri tse sebetsang
Ho betla le ho seha ka nepo thepa e seng ea tšepe e kang lehong, acrylic le MDF.
E loketse papatso, mesebetsi ea matsoho, mekhabiso, ts'ebetso ea thepa ea ka tlung le liindasteri tse ling.
<< Bala Mehlala e Eketsehileng mabapi le ho Seha le ho Fata ka Laser, MDF, Acrylic
Ka kopo ikopanye le goldenlaser bakeng sa tlhahisoleseling e batsi. Karabo ea hau ea lipotso tse latelang e tla re thusa ho khothaletsa mochini o loketseng ka ho fetisisa.
1. Tlhokahalo ea hau ea mantlha ea ts'ebetso ke efe? Ho seha ka laser kapa ho betla ka laser (ho tšoaea) kapa ho phunyeletsa ka laser?
2. Ke thepa efe eo u e hlokang ho sebetsa ka laser?
3. Boholo le botenya ba thepa ke bofe?
4. Kamora hore ho sebetswe ka laser, thepa e tla sebediswa bakeng sa eng? (indasteri ya tshebediso) / Sehlahiswa sa hao sa ho qetela ke sefe?
5. Lebitso la khamphani ea hau, websaete, Imeile, Mohala (WhatsApp / WeChat)?
Nomoro ea Mohlala: JMCCJG-160200LD
Sehahi sa Laser sa CO2 bakeng sa Sleeve ea Tšireletso ea ho Fokotsa Mocheso e Lohiloeng
Nomoro ea Mohlala: JMCZJJG(3D)-250300LD
