Laser Die Cutting Machine for Reflective Material / Transfer Film
Model NO.: LC230
1. The laser die cutting machine is specifically designed for the cutting and perforating of reflective material, transfer film and other roll materials.
2. High speed roll-to-roll laser cutting, high degree of automation.
3. Laser replaced traditional knife-cutting, No mould required. No graphics restrictions. Laser can cut as per any of your required designs and shapes.
4. Non-contact laser processing. No need to be shut down due to the glue on the tool, without frequent replacement of the tool accessories.
5. Laser is suitable for processing complex graphics with high precision.
Laser die-cut reflective material, perfect for the high-visibility clothing industry.
(reflective material - apparel decoration for emergency workers, joggers and bikers safety; waterproof, highly reflective finish.)
• Continuous cutting, seamless connection, changing graphics at any time
• Minimized the waste of material
• Precisely laser cutting very small logo designs within 2mm
• 10 times faster than traditional X-Y gantry cutters
• Waste removal and slitting automatically in line
Laser Die Cutting Machine LC230 | ||
A. | Main Technical Parameters | |
Working Area | Width 230mm, Length ∞ | |
Maximum Web Width | 230mm | |
Maximum Web Speed | Up to 20m/min | |
Diameter | 1840mm (L) X 730mm (W) X 700mm (H) | |
Weight | 700Kg | |
Consumption | 2KW | |
Power supply | 380V / 220V three phase 50Hz / 60Hz | |
B. | Standard Configuration | |
1. | Unwinder | |
Maximum Web Diameter | 400mm | |
Maximum Web Width | 210mm | |
Core | 3 inch | |
Pneumatic Expanding Shaft | 3 inch | |
Tension Control |
Manual | |
Splice Table | Manual | |
Web Guide | None | |
2. | Laser System | |
Laser Source | Sealed CO2 RF laser | |
Laser Power | 100W / 150W | |
Laser Wavelength | 10.6 micron | |
Laser Beam Positioning | Galvanometer | |
Laser Spot Size | 210 microns | |
Cooling | Water cooling | |
3. | Matrix Removal | |
Back side slitting | None | |
Matrix Rewinding | ||
Pneumatic Expanding Shaft | 3 inch | |
4. | Rewinder | |
Tension Control | Manual | |
Pneumatic Expanding Shaft | 3 inch | |
C. | Options | Varnishing unit with UV dryer |
Laminating unit | ||
Slitting unit | ||
*** Note: As products are constantly updated, please contact us for latest specifications. *** |
LASER DIE CUTTING MACHINE – Typical Models
1. LC-230 Laser Die Cutting Machine
Smart and economical desktop-type model
(Max.Web Width 230mm)
Working Area | Width 230mm, Length ∞ |
Maximum Web Width | 230mm |
Maximum Web Diameter | 400mm |
Maximum Web Speed | Up to 20m/min |
Laser Source | Sealed CO2 RF laser 100W / 150W |
Diameter | 1840mm (L) X 730mm (W) X 700mm (H) |
Weight | 700Kg |
Consumption | 2KW |
Power supply | 380V / 220V three phase 50Hz / 60Hz |
2. LC-350 Laser Die Cutting Machine
(Max. Web Width 360mm)
Working Area | Width 350mm, Length ∞ |
Maximum Web Width | 360mm |
Maximum Web Diameter | 600mm |
Maximum Web Speed | Up to 80m/min |
Laser Source | Sealed CO2 RF laser 275W / 500W |
Diameter | 3010mm (L) X 2250mm (W) X 1700mm (H) |
Weight | 2100Kg |
Consumption | 5KW |
Power supply | 380V three phase 50Hz / 60Hz |
a
Application
Reflective material, reflective tapes, transfer film, Retro reflection for high-visibility clothing, retro-reflective transfers, Aramid based flame retardant retro-reflective fabric, etc.