Xalka dhamaystirka laser ee beddelka calaamadaha
Miiska gaarka ah ee cabbirka leysarka ayaa ku dhinta suuqa qiimo jaban
LC230 waa is haysta, dhaqaale iyo dhamaystirandijitaalka dhinta laser, la heli karoHal ama Dual Laser Heads. LC230 waxay la socotaa heerka caadiga ahkala furfurid, goynta laysarka, dib u celiniyosaarista qashinka qashinkaunugyo. Waxayna u diyaarsan tahay modules add-on sidavarnishing UV, laminationiyodilidiwm.
Nidaamka waa lagu rakibi karaaakhristayaasha barcodesi toos ah u beddelka qaabka duulimaadka.IsbuunyoamaRobots-ka-soo-qaadistawaxaa lagu dari karaa axal si toos ah u toos ah.
LC230 waxay bixisaa xal dhijitaalka ah oo dhammaystiran oo toos ah oo loogu talagalay duubista duubista (ama duubista xaashida) goynta laser. Looma baahna kharash qalabayn dheeri ah iyo wakhtiga sugitaanka, dabacsanaanta kama dambaysta ah si loo fuliyo baahiyaha suuqa ee firfircoon.
Faa'iidooyinka Laser Die Cutter
Dhamaystirka laysarka dhijitaalka ah “rogid si loo rogo” goynta laysarka iyo beddelka
Isbeddel degdeg ah
Waxay baabi'isaa qalabaynta dhaqanka & dhinta been-abuurka, dayactirka iyo kaydinta. Xalka ugu habboon ee wax-soo-saarka-waqtiga-ku-oolka ah iyo kuwa-gaaban.
Nidaamyo Badan
Ku habboon noocyada kala duwan ee shaqada:
Goynta buuxda, dhunkashada-goynta, daloolinta, daloolinta micro, xaradhka, calaamadaynta, kor u qaadida - in hal socodsiineed.
Socodka Shaqada Dijitaalka ah
Xalka socodka shaqada dhijitaalka ah oo dhamaystiran:
Isbeddelka qaabku waa mid fudud sida furitaanka faylka; looma baahna waqti dhimis ama habayn.
Goynta saxda ah
Soo saar joomatari adag iyo tayada qayb sare oo aan lagu soo koobi karin habka dhinta ee soo jireenka ah.
Nidaamka Aragga - Jar si loo daabaco
Nidaamyada kamaradaha aragga ama dareemayaasha ayaa diyaar u ah diiwaangelinta agabka daabacan ama qaababka goynta ka hor, taas oo u oggolaanaysa goynta saxda ah diiwaangelinta daabacan ee 0.1mm.
Software-ka caqliga leh
Algorithms-yada caqliga leh ee software-ku-soo-saaray waxay hagaajiyaan saxnaanta goynta iyagoo si joogto ah u hagaajinaya xawaaraha socodsiinta laysarka si ay ugu dhigmaan sawirro kala duwan.
PC Workstation
Iyada oo loo marayo Workstation PC waxaad maareyn kartaa dhammaan cabbirrada saldhigga laysarka, kor u qaad qaabka wax-soo-saarka ugu badan.
Naqshadaynta Modular
Dabacsanaan Ba'an: Doorashooyin kala duwan ayaa diyaar u ah in si otomaatig ah loo habeeyo oo loogu habeeyo nidaamka si ay ugu habboonaato noocyo badan oo kala duwan oo ah shuruudaha beddelka.
Jidka Goynta aan xadidnayn
Dhuxul goynta waxaa loo dhaqaajin karaa jihada oo si habsami leh u gooyaa. Si fudud u samee geeso wareegsan, geeso gees ah ama geeso jeexan si loogu calaamadeeyo qaabka.
Saldhigyada Modular-ka ah waxay bixiyaan wax-qabad aan dhammaad lahayn
• Goyn (Madiir, maqas & Dhibic Goyn)
• Kala-baxa UV
• Lamination
• Dhibcaha dambe (kala goy) safka
• Hagidda Shabakadda Tooska ah
• Isku-xidhka Beddelka Tooska ah (Sare ama Hoose)
Akhriska Barcode - shaqada ee duulimaadka ayaa isbedelaya
• Ka saarida Matrixka
• Dual Rewinder
Unugga is dulsaarka
Unug xaashida oo leh Miiska wareejinta la hagaajin karo
Halbeegga Farsamo ee ugu weyn ee LC230 Dijital ah ee Laser Die Cutter
| Qaabka No. | LC230 |
| Max. ballac goynta | 230mm / 9" |
| Max. dhererka goynta | Aan xad lahayn |
| Max. ballaca quudinta | 240mm / 9.4" |
| Max. dhexroorka webka | 400mm / 15.7" |
| Xawaaraha shabakada | 0-60m/daqiiqo (xawaaruhu wuu kala duwan yahay iyadoo ku xidhan agabka iyo qaabka goynta) |
| Saxnaanta | ±0.1mm |
| Nooca laser | CO2 RF laser bir ah |
| Awoodda leysarka | 100W / 150W / 300W |
| Korontada | 380V saddex waji 50/60Hz |
Soo dejinta naqshadaha
Taageerada .dxf, .dst, .jpg, .ai, .plt, .bmp. iwm.
Dejinta cabbirka
Korontada leysarka, xawaaraha shaqada, labaels tiro ahaan la jarayo, iwm.
Bilow goynta
Kumbuyuutarku si otomaatig ah ayuu u kaydiyaa halbeegyada walxaha iyo qaababka isku midka ah
Muunadaha Goynta Laser-ka
Daawo Laser Dhimashada oo Goynaysa!
Cutter-ka dhijitaalka ah ee dhijitaalka ah ee loo yaqaan 'Labels' 100 Watts LC230
Qiyaasaha Farsamada ee Dijital ah ee Laser Die Cutter LC230
| Halbeegyada Farsamo ee ugu muhiimsan |
| Goobta shaqada | Ballaca 230mm (9 ″), Dhererka ∞ |
| Xawaaraha | 0-60m/min (waxay kuxirantahay awooda laysarka iyo qaabka la jaray) |
| Cabirka Mashiinka | 2400mm (L) X 730mm (W) X 1800mm (H) |
| Miisaanka | 1500Kg |
| Isticmaalka | 2KW |
| Korontada | 380V/220V, 50Hz/60Hz, saddex weji |
| Habaynta caadiga ah |
| Ka fur | |
| Balaadhka Shabakadda ugu badan | 240mm (9.4″) |
| Dhexroorka Shabakadda ugu badan | 400mm (15.7 ") |
| Xudunta | 3 inji |
| Shafka Balaadhinta ee Pneumatic | 3 inji |
| Xakamaynta xiisadda | Ikhtiyaar |
| Shaxda Qaybsan | Ikhtiyaar |
| Hagaha Shabkada | BST / EURDOW (Ikhtiyaar) |
| Nidaamka Laser-ka |
| Isha Laser | Laydhka CO2 RF oo xidhan |
| Awoodda leysarka | 100W / 150W / 300W |
| Dhererka Mawjadaha Laser | 10.6 micron ama wax kale |
| Meelaynta Beam Laser | Galvanometer |
| Cabbirka Goobta Laser-ka | 210 microns |
| Nidaamka qaboojinta | Biyo qaboojinta |
| Ka saarida Matrix |
| Jeexitaanka dhinaca dambe | |
| Matrix Rewinding | |
| Shafka Balaadhinta ee Pneumatic | 3 inji |
| Dib-u-celinta |
| Xakamaynta xiisadda | Ikhtiyaar |
| Shafka Balaadhinta ee Pneumatic | 3 inji |
| Ikhtiyaarada |
| Unugga kala duwanaanshaha UV | |
| Unug lamining | |
| Unug goynta | |
*** Fiiro gaar ah: Sida badeecadaha si joogto ah loo cusboonaysiiyo, fadlan nala soo xiriir si aad u hesho tilmaamo cusub.***
Moodooyinka Caadiga ah ee Laser-ka Dahabka ah ee Dijital ah ee Laser Die Cutters
| Qaabka No. | LC230 | LC350 |
| Max. ballac goynta | 230mm / 9 " | 350mm / 13.7" |
| Balaadhka shabakada | 240mm / 9.4" | 370mm / 14.5 " |
| Dhexroorka shabakada ugu badan | 400mm / 15.7" | 750mm / 29.5" |
| Xawaaraha shabakada | 0-60m/daqiiqo | 0-120m/min |
| (xawaaruhu wuu kala duwan yahay iyadoo ku xidhan agabka iyo qaabka goynta) |
| Nooca laser | CO2 RF laser bir ah |
| Awoodda leysarka | 100W / 150W / 300W | 150W / 300W / 600W |
| Cabirka | 2400mm (L) X 730mm (W) X 1800mm (H) | 3700mm (L) X 2000mm (W) X 1820mm (H) |
| Miisaanka | 1500Kg | 3000Kg |
| Shaqada caadiga ah | Goynta buuxda, dhunkashada gooynta (goynta badhkeed), daloolinta, xaradhka, calaamadaynta, iwm. |
| Shaqada ikhtiyaarka ah | Lamination, varnish UV, dilid, iwm. |
| Qalabka farsamaynta | PET, warqad, warqad dhalaalaya, warqad matt, polyester, polypropylene, BOPP, balaastiig, filim, polyimide, cajalado milicsiga, dhar, warqad ciid, iwm. |
| Qaababka sawirada la taageeray | AI, BMP, PLT, DXF, DST |
| Korontada | 380V 50HZ ama 60HZ / Saddex weji |
Codsiga Beddelka Laser
Qalabka caadiga ah ee loo isticmaalo mishiinada goynta laysarka waxaa ka mid ah:
Warqad, filim caag ah, warqad dhalaalaya, warqad matt, warqad synthetic, kartoonnada, polyester, polypropylene (PP), PU, PET, BOPP, balaastiig, filim, filim microfinishing, iwm.
Codsiyada caadiga ah ee mashiinada goynta laysarka waxaa ka mid ah:
- Calaamadaha
- Calaamadaha Xabagta iyo Cajalada
- Cajalado Milicsan / Filimaan Dib-u-eegis ah
- Cajalada Warshadaha / 3M Cajalad
- Calaamadaha / dhejiska
- Abrasives
- Gaaska
Fadlan la xidhiidh Golden Laser wixii macluumaad dheeraad ah. Jawaabtaada su'aalaha soo socda ayaa naga caawin doona inaan kugula talinno mashiinka ugu habboon.
1. Waa maxay shuruudahaaga habayn ee ugu weyn? Dul-rog-rogid? Mise go'an?
2. Maxaa agab ah oo aad u baahan tahay si aad u farsamayso laysarka?Waa maxay xajmiga iyo dhumucda alaabta?
3. Waa maxay badeecadaada ugu dambeysa(warshadaha codsiyada)?
