Laser Cutting Machine, Laser Engraving Machine, Galvo Laser Machine - Golden Laser

Gear & Rack Driven CO2 Laser Cutter for Technical Textiles

JMC laser cutter for technical textiles

Model No.: JMC-250300LD

Introduction:

The gear & rack driven laser cutting machine is strong enough to undertake high power CO2 laser tube. It realizes super high acceleration speed and cutting speed with flying optics.



Gear Rack Driven CO2 Laser Cutting System

JMC SERIES → High-precision, fast, highly automated

The Gear & Rack Driven Laser Cutting Machine is upgraded from the basic belt driven version. The basic belt driven system has its limitation when running with high power laser tube, whereas the Gear & Rack driven version is strong enough to undertake the high power laser tube. The laser cutting machine can be equipped with high power laser tube up to 1,000W and flying optics to perform with super high acceleration speed and cutting speed.

laser cutter

Four Reasons

to Choose GOLDEN LASER JMC SERIES CO2 Laser Cutting Machine

tension feeding-small icon 100

1. Precision tension feeding

No tension feeder will easy to distort the variant in the feeding process, resulting the ordinary correction function multiplier. Tension feeder in a comprehensive fixed on both sides of the material at the same time, with automatically pull the cloth delivery by roller, all process with tension, it will be perfect correction and feeding precision.

tension feeding VS non-tension feeding

high-speed high-precision laser cutting-small icon 100

2. High-speed cutting

Rack and pinion motion system equipped with high-power CO2 laser tube, reaches to 1200 mm/s cutting speed, 12000 mm/s2 acceleration speed.

automatic sorting system-small icon 100

3. Automatic sorting system

Fully automatic sorting system. Material feeding, cutting, sorting at one time.

working areas can be customized-small icon 100

4. Working areas can be customized

2300mm×2300mm (90.5 inch×90.5 inch), 2500mm×3000mm (98.4in×118in), 3000mm×3000mm (118in×118in), Or optional. The largest working area is up to 3200mm×12000mm (126in×472.4in)

JMC laser cutter customized working areas

Watch JMC CO2 laser cutter in Action!

Machine Features

High speed double gear and rack driving system

Slim laser beam. Spot diameter up to 0.2mm~0.3mm

Capable of cutting any complicated design

Continuous cutting with overlength nesting

Equipped with feeder, full automation in the whole process.

Automatic nesting and automatic extraction of contour are optional

Laser machining requires only electricity, no auxiliary gas. Low operating and maintenance costs

Laser cutting of technical textiles

CO2 lasers can cut a variety of fabrics quickly and easily. Suitable for laser cutting materials as different as filter mats, polyester, non-woven fabrics, glass fibre, linen, fleece and insulation materials, leather, cotton and more.

The advantages of lasers over traditional cutting tools:

High speed

High flexibility

High precision

Contactless and tool-free process

Clean, perfectly sealed edges - no fraying!

Textile processing directly from the roll

Technical Parameter

Laser type CO2 laser
Laser power 150W / 300W / 600W / 800W CO2 RF tube
150W / 300W CO2 glass tube
Cutting area (L)2m~8m×(W)1.3m~3.2m
(L)78.7in~314.9in×(W)51.1in~125.9in
Cutting table Vacuum conveyor working table
Cutting speed 0-1200mm/s
Acceleration speed 12000mm/s2
Repeat positioning accuracy ±0.03mm
Positioning accuracy ±0.05mm
Motion system Servo motor, gear & rack driven
Power supply AI, BMP, PLT, DXF, DST
Lubrication system Automatic lubrication system
Option Auto feeder, red light position, marker pen, 3D Galvo, double heads

GOLDEN LASER – JMC SERIES HIGH SPEED HIGH PRECISION LASER CUTTER

Model No.: JMC160200LD / JMC160300LD / JMC230230LD / JMC250300LD / JMC300300LD / JMC350400LD … …

Cutting area: 1600mm×2000mm (63″×79″), 1600mm×3000mm (63″×118″), 2300mm×2300mm (90.5″×90.5″), 2500mm×3000mm (98.4″×118″), 3000mm×3000mm (118″×118″), 3500mm×4000mm (137.7″×157.4″)

***The cutting area can be customized according to different applications.***

Working Areas

Materials

polyester (PES), viscose, cotton, nylon, nonwoven and woven fabrics, synthetic fibers, polypropylene (PP), knitted fabrics, felts, polyamide (PA), glass fiber (or glass fibre, fiberglass, fibreglass), Kevlar, aramid, polyester PET, PTFE, paper, foam, cotton, plastic, etc.

Applications

1. Clothing Textiles: technical textiles for clothing applications.

2. Home Textiles: carpets, mattress, sofas, curtains, cushion materials, pillows, floor and wall coverings, textile wallpaper, etc.

3. Industrial Textiles: filtration, air dispersion ducts, etc.

4. Textiles used in automotive and aerospace: aircraft carpets, cat mats, seat covers, seat belts, airbags, etc.

5. Outdoors and Sports textiles: sports equipment, flying and sailing sports, canvas covers, marquee tents, parachutes, paragliding, kitesurf, boats (inflatable), air balloons, etc.

6. Protective textiles: insulation materials, bulletproof vests, etc.

Please contact GOLDEN LASER for more infomation. Your response of following questions will help us recommend the most suitable machine.

1. What is your main processing requirement? Laser cutting or laser engraving (marking) or laser perforating?

2. What material do you need to laser process?

3. What is the size and thickness of the material?

4. After laser processed, what will be the material used for? (application) / What is your final product?

5. Your company name, website, Email, Tel (WhatsApp…)?


Related Products