SuperLAB | Injin laser na XY Gantry & Galvo tare da kyamarar CCD
Lambar Samfura: ZDJMCZJJG-12060SG
Gabatarwa:
SuperLAB, wanda aka haɗa da alamar laser, sassaka laser da yanke laser, cibiyar sarrafa laser CO2 ce don abubuwan da ba ƙarfe ba. Yana da ayyukan sanya ido a gani, gyara maɓalli ɗaya da kuma mayar da hankali ta atomatik. Ya dace musamman don R&D da shirya samfura.
- Nau'in Laser:Laser ƙarfe CO2 RF
- Ƙarfin Laser:150W, 300W, 600W
- Wurin aiki:1200mm × 600mm
FA'IDA
Babban saurin yankewa
Tsarin tuƙi na gear guda biyu. Gudun yankewa 800mm/s. Hanzari: 8000mm/s2
Galvo da Gantry tare da kyamarar CCD
Kan yanke laser na XY da kan Galvo suna canzawa ta atomatik. Kyamarar CCD da aka saita tana sauƙaƙa aikin, tana adana lokacin daidaitawar tsari da yawa, tana rage kuskuren da aka samu sakamakon maimaita matsayi.
Babban daidaiton yankewa
Daidaiton yankewa bai wuce 0.2mm ba;
Kuskuren yanke alamar alama bai wuce 0.3mm ba
Ingantaccen daidaito na babban tsarin zane-zane
Kuskuren tsarin 200mm bai wuce 0.2mm ba;
Kuskuren tsarin 400mm bai wuce 0.3mm ba
Sabon gyaran daidaitawa ta atomatik
Daidaita kyamara ta atomatik, ba sai an auna ta da hannu ba. Gyaran farko yana ɗaukar awanni 1-2 kawai, yana ɗaukar sauƙin aiki kuma ba buƙatar ƙwarewa ga abokan ciniki.
Tsarin jigilar Laser ta atomatik
Ba sai an sake gyara ba. Tsarin jeri zai iya daidaita tazara tsakanin kan laser da tebur ta atomatik bisa ga kauri daban-daban na kayan aiki, yana tabbatar da cewa mayar da hankali kan laser a daidai wurin da ya dace.
Fasahar da Aka Fi So
Canjin kan Galvo da kan yanke XY
Tsarin sarrafa laser mai kusurwa biyu
Tsarin mayar da hankali kan ci gaba
Tsarin gane kyamara mai inganci
Babban gudu & babban yankewa daidai
Tsarin sassaka da huda rami mai ƙarfi na 3D mai ƙarfi
Kan Galvo da gangry tare da kyamarar CCD
Ma'aikacin yanke laser mai kama da cambered
Gidaje ta atomatik
Ci gaba da zane-zanen laser tare da fasahar haɗa alamu
Gano wurin yankewa da kuma gane haɗin gwiwa ta hanyar alama
Kalli Wannan Injin Laser Yana Aiki!
Sigogi na Fasaha
| Lambar Samfura | ZDJMCZJJG-12060SG |
| Nau'in Laser | CO2 RF ƙarfe Laser tube |
| Ƙarfin Laser | 150W, 300W, 600W |
| Tsarin Galvo | Tsarin aiki mai ƙarfi na 3D, kan laser na galvanometer SCANLAB, yankin dubawa 450mm × 450mm |
| Wurin aiki | 1200mm × 600mm |
| Teburin aiki | Teburin aiki na Zn-Fe mai hawa-sama ta atomatik |
| Tsarin gani | Alamar kyamarar CCD ta gane yankewa |
| Tsarin motsi | Motar hidima |
| Matsakaicin saurin matsayi | Har zuwa mita 8/s |
| Tsarin sanyaya | Mai sanyaya ruwa mai yawan zafin jiki |
| Lambar Samfura | Kayayyaki | Wuraren Aiki |
| ZDJMCZJJG-12060SG | Mai Yanke Laser na Co2 & Galvo Laser tare da Kyamarar CCD | 1200mm × 600mm (47.2in × 23.6in) |
| ZJ(3D)-9045TB | Injin sassaka na Galvo Laser | 900mm × 450mm (35.4in × 17.7in) |
| ZJ(3D)-160100LD | Injin Yankan Galvo Laser | 1600mm × 1000mm (62.9in×39.3in) |
| ZJ(3D)-170200LD | Injin Yankan Galvo Laser | 1700mm × 2000mm (66.9in × 78.7in) |
| JMCZJJG(3D)210310 | Flatbed CO2 Gantry da Galvo Laser Yankan sassaka Machine | 2100mm × 3100mm (82.6in × 122in) |
Aikace-aikace
• Ƙaramin tambari, harafin twill, lamba da sauran abubuwa daidai
• Jakar da ke huda ciki, yankewa, sumbatar juna; Huda ciki mai aiki; Ɓarkewar riga
• Takalma, jakunkuna, akwati, kayayyakin fata, tambarin fata, zane-zanen sana'o'in fata
• Masana'antar allon ƙira na bugawa
• Katunan gaisuwa da masana'antar kwali mai laushi
• Ya dace da kayan ulu, denim, da zane-zanen yadi amma ba'a iyakance ga su ba
Da fatan za a tuntuɓi GOLDEN LASER don ƙarin bayani. Amsar ku daga waɗannan tambayoyin zai taimaka mana mu ba da shawarar injin da ya fi dacewa.
1. Menene babban buƙatar sarrafa kayan aikinka? Yanke Laser ko sassaka Laser (alama) ko huda Laser?
2. Abin da kayan da kuke buƙatar aiwatarwa ta Laser?
3. Menene girman da kauri na kayan?
4. Bayan an sarrafa laser, me za a yi amfani da kayan? (aiki) / Menene samfurin ƙarshe naka?
5. Sunan kamfaninka, gidan yanar gizonka, Imel, Waya (WhatsApp…)?
