Yadi na Fasaha da Yanke Laser

Ana ƙera yadin fasaha daga nau'ikan zare/zare bisa ga halayen da ake so na samfurin ƙarshe. Zare/zare da ake amfani da su za a iya rarraba su a matsayin na halitta ko na ɗan adam. Zare na halitta suna da mahimmanci ga masana'antar yadin fasaha. Zare na halitta da ake amfani da su galibi a cikin yadin fasaha sun haɗa da auduga, jute, siliki da coir. Zare na mutum (MMF) da zare na roba da aka yi da hannu (MMFY) suna wakiltar kusan kashi 40% na jimillar yawan amfani da zare a masana'antar yadin gabaɗaya. Waɗannan zare suna samar da babban kayan masarufi ga masana'antar yadin fasaha saboda kaddarorin da ake iya keɓancewa. Manyan zare, zare da polymers da aka yi da hannu da ake amfani da su azaman kayan aiki a cikin yadin fasaha sune viscose, PES, nailan, acrylic/modacrylic, polypropylene da polymers kamar high density polyethylene (HDPE), low density polyethylene (LDPE), da polyvinyl chloride (PVC).

Mafi yawan lokaci,Yadin FasahaAn bayyana su a matsayin kayayyaki da kayayyakin da aka ƙera musamman don halayen fasaha da aiki maimakon halayensu na ado ko na ado. Ana amfani da waɗannan yadi wajen gina motoci, layin dogo, jiragen ruwa, jiragen sama da sararin samaniya. Misalan su ne murfin manyan motoci (yadin PES mai rufi da PVC), murfin akwati na mota, bel ɗin lashing don ɗaure kaya, murfin kujera (kayan saƙa), bel ɗin kujera, wanda ba a saka ba don jakunkunan iska na tace iska a cikin gida, parachutes, da jiragen ruwa masu hura iska. Ana amfani da waɗannan yadi a cikin motoci, jiragen ruwa da jiragen sama. Ana amfani da yadi da yawa masu rufi da ƙarfafawa a cikin kayan injina kamar bututun iska, bel ɗin lokaci, matatun iska, da waɗanda ba a saka ba don keɓewar sauti na injin. Ana kuma amfani da wasu kayan aiki a cikin cikin motoci. Mafi bayyane su ne murfin kujera, bel ɗin aminci da jakunkunan iska, amma kuma ana iya samun manne na yadi. Nailan yana ba da ƙarfi kuma ƙarfinsa mai ƙarfi yana sa ya dace da jakunkunan iska na mota. Ana amfani da haɗakar carbon galibi wajen ƙera sassan jirgin sama, yayin da ake amfani da fiber na carbon don yin tayoyi masu tsayi.

Ga yadin fasaha da ake amfani da su don aikace-aikacen masana'antu da yawa,Laser na ZinareYana da mafita na musamman na laser don sarrafawa, musamman a fannin tacewa, kera motoci, rufin zafi, SOXDUCT da masana'antar sufuri. Tare da sama da shekaru 20 na haɗin gwiwa na ƙwarewa a masana'antar aikace-aikacen laser na duniya, Golden Laser yana ba abokan ciniki babban aiki.injunan laser, cikakkun ayyuka, hanyoyin laser da aka haɗa da sakamako ba su da misaltuwa. Ko da wace fasahar laser kake son amfani da ita, yankewa, sassaka, hudawa, sassaka ko yiwa alama, ƙwararrunmu na musamman suna aiki tuƙuru.mafita na yanke lasersa yadin fasaha ya yi aiki mafi kyau a takamaiman aikace-aikace.