Naanị iji GOLDENLASER Systems ma nwee obi ụtọ na mmepụta gị.
Igwe eji egbutu laser akpaka nwere igwefoto CCD na ihe ntinye mpịakọta
Nọmba nlereanya: ZDJG-3020LD
Okwu Mmalite:
- Ike laser CO2 site na watt 65 ruo watt 150
- Dabara adaba maka ịkpụ rịbọn na akara na mpịakọta nke obosara n'ime 200mm
- Mkpụcha zuru oke site na mpịakọta gaa na iberibe
- Igwefoto CCD iji mata ụdị akara ahụ
- Tebụl na-arụ ọrụ na-ebuga ihe na mpịakọta - Nhazi akpaka na-aga n'ihu
Nkọwapụta
Nkọwapụta Teknụzụ Isi nke ZDJG-3020LD CCD Camera Laser Cutter
| Ụdị Lesa | CO2 DC iko laser tube |
| Ike Laser | 65W / 80W / 110W / 130W / 150W |
| Ebe Ọrụ | 300mm × 200mm |
| Tebụl Ọrụ | Tebụl na-arụ ọrụ ibugharị |
| Izizi Ọnọdụ | ±0.1mm |
| Sistemụ Mmegharị | Nzọụkwụ moto |
| Sistemụ Jụụ | Igwe oyi mmiri na-agbanwe agbanwe |
| Sistemụ Ikpochapụ | Sistemụ anwụrụ ọkụ 550W ma ọ bụ 1100W |
| Ikuku na-efe | Obere ikuku compressor |
| Ịnye ọkụ | AC220V±5% 50/60Hz |
| Akwadoro Usoro Eserese | PLT, DXF, AI, BMP, DST |
Atụmatụ igwe
Uru Ịcha Laser
Ihe na Ụlọ Ọrụ Ndị Dị Mkpa
Dabara adaba maka akara e ji ákwà kpaa, akara e ji ákwà kpaa, akara e biri ebi, Velcro, rịbọn, eriri weebụ, wdg.
Ákwà ndị e ji aka mee na nke e ji aka mee, dịka polyester, naịlọn, akpụkpọ anụ, akwụkwọ, wdg.
Ọ dabara na aha uwe na mmepụta ihe eji achọ uwe.
Ụfọdụ ihe atụ ịkpụ laser
Anyị na-ewetara gị ngwọta nhazi laser dị mfe, ngwa ngwa, nkeonwe na nke dị ọnụ ala mgbe niile.
Usoro Nkà na ụzụ
| NỌMBA nke ụdị. | ZDJG3020LD |
| Ụdị Lesa | CO2 DC iko laser tube |
| Ike Laser | 65W 80W 110W 130W 150W |
| Ebe Ọrụ | 300mm × 200mm |
| Tebụl Ọrụ | Tebụl na-arụ ọrụ ibugharị |
| Izizi Ọnọdụ | ±0.1mm |
| Sistemụ Mmegharị | Nzọụkwụ moto |
| Sistemụ Jụụ | Igwe oyi mmiri na-agbanwe agbanwe |
| Sistemụ Ikpochapụ | Sistemụ anwụrụ ọkụ 550W ma ọ bụ 1100W |
| Ikuku na-efe | Obere ikuku compressor |
| Ịnye ọkụ | AC220V±5% 50/60Hz |
| Akwadoro Usoro Eserese | PLT, DXF, AI, BMP, DST |
| Akụkụ Mpụga | 1760mm(L)×740mm(W)×1390mm(H) |
| Nha ịbụ | 205KG |
*** Rịba ama: Ebe ọ bụ na a na-emelite ngwaahịa mgbe niile, biko kpọtụrụ anyị maka nkọwapụta kachasị ọhụrụ. ***
Nchịkọta Sistemụ Laser nke GOLDENLASER MARS
1. Igwe Ịcha Laser na Igwefoto CCD
| Nọmba nlereanya | Ebe ọrụ |
| ZDJG-9050 | 900mm×500mm (35.4”×19.6”) |
| MZDJG-160100LD | 1600mm × 1000mm (63” × 39.3”) |
| ZDJG-3020LD | 300mm × 200mm (11.8” × 7.8”) |
2. Igwe Ịcha Laser nwere eriri ibugharị
| Nọmba nlereanya | Isi laser | Ebe ọrụ |
| MJG-160100LD | Otu isi | 1600mm × 1000mm |
| MJGHY-160100LD II | Isi abụọ | |
| MJG-14090LD | Otu isi | 1400mm × 900mm |
| MJGHY-14090D II | Isi abụọ | |
| MJG-180100LD | Otu isi | 1800mm × 1000mm |
| MJGHY-180100 II | Isi abụọ | |
| JGHY-16580 nke anọ | Isi anọ | 1650mm × 800mm |
3. Igwe Ịkpụcha Laser na Tebụl Ọrụ Mmanụ aṅụ
| Nọmba nlereanya | Isi laser | Ebe ọrụ |
| JG-10060 | Otu isi | 1000mm × 600mm |
| JG-13070 | Otu isi | 1300mm × 700mm |
| JGHY-12570 II | Isi abụọ | 1250mm × 700mm |
| JG-13090 | Otu isi | 1300mm × 900mm |
| MJG-14090 | Otu isi | 1400mm × 900mm |
| MJGHY-14090 II | Isi abụọ | |
| MJG-160100 | Otu isi | 1600mm × 1000mm |
| MJGHY-160100 II | Isi abụọ | |
| MJG-180100 | Otu isi | 1800mm × 1000mm |
| MJGHY-180100 II | Isi abụọ |
4. Igwe Ịkpụcha Laser na Sistemụ Ibuli Tebụl
| Nọmba nlereanya | Isi laser | Ebe ọrụ |
| JG-10060SG | Otu isi | 1000mm × 600mm |
| JG-13090SG | 1300mm × 900mm |
Ihe na ụlọ ọrụ ndị dị mkpa
Dabara adaba maka akara e ji ákwà kpaa, akara e ji ákwà kpaa, akara e biri ebi, Velcro, rịbọn, eriri weebụ, wdg.
Ákwà ndị e ji ihe ndị e ji aka mee na nke e ji aka mee, dịka polyester, naịlọn, akpụkpọ anụ, akwụkwọ, fiberglass, Aramid, wdg.
Ọ dabara na aha uwe na mmepụta ihe eji achọ uwe.
Ihe Nlereanya Ịcha Laser
Biko kpọtụrụ goldenlaser maka ozi ndị ọzọ. Azịza gị nke ajụjụ ndị a ga-enyere anyị aka ịkwado igwe kacha mma.
1. Gịnị bụ isi ihe ị chọrọ iji hazie ya? Ịcha laser ma ọ bụ ịkpụ laser (akara) ma ọ bụ ịkụnye laser?
2. Gịnị ihe ị chọrọ iji laser usoro?
3. Kedu nha na ọkpụrụkpụ nke ihe ahụ?
4. Mgbe emechara laser, gịnị ka a ga-eji ihe eji eme ya? (ụlọ ọrụ ngwa) / Gịnị bụ ngwaahịa ikpeazụ gị?
5. Aha ụlọ ọrụ gị, weebụsaịtị, ozi ịntanetị, ekwentị (WhatsApp / WeChat)?
Dee ozi gị ebe a zitere anyị ya
