Canjin Talla da aka Buga ta Laser Cut don "Injinan Sauya Dan Adam"!
A matsayin kayan aikin nunin baje koli mai kyau, ana ƙara amfani da tutocin talla a cikin ayyukan tallan kasuwanci daban-daban. Kuma nau'ikan tutocin suna da bambanci, tutocin allurar ruwa, tutar bakin teku, tutar kamfani, tutar gargajiya, tutocin bunting, tutar igiya, tutar gashin fuka-fukai, tutar kyauta, tutar rataye da sauransu.
Yayin da buƙatun kasuwanci ke ƙara zama na musamman, nau'ikan tutocin talla na musamman suma sun ƙaru. Ci gaba da fasahar canja wurin zafi da fasahar buga dijital a cikin tallan tutocin musamman sun fi yawa, amma ba su dace ba har yanzu babban yankewa ne.
Hanyar yanke gargajiya
Naɗe zane yana ɗaukar mutane 3-4 su yanka sau uku
Mataki na farko -Mutane 3 zuwa 4 suna sanya tuta da aka buga a kan babban teburi. Yi amfani da almakashi don yanke kayan a karon farko.
Yanka ta biyu -Daidaita layin yankewa da tsarin mulki ko ƙarfe sannan a yanke shi da wuka mai zafi
Yanka ta uku -Yankakken yanka, kafin dinki
Amma waɗannan sun shafi ƙa'idodin tutar murabba'i mai siffar murabba'i; Yadda ake sarrafa tutar mai siffar murabba'i?
Suna amfani da almakashi, eh, babu kuskure,
Ana amfani da shi tsawon dubban shekarualmakashi!
Duk da haka, waɗannan hanyoyin aiki masu wahala, a zahiri, na iya zamaan kammala shi da cikakken saitin na'ura, wato, Laser na Zinare –Injin Yanke Laser na Gani !
Sashen yankan kayan bugawa na ƙwararru
Za ku iya yanke alamu na yau da kullun
Hakanan zaka iya yanke alamu marasa tsari waɗanda ba su da tsari
Daidaito a cikin 0.5 mm, sau ɗaya a yanka siffar!
Abin da kawai ma'aikata ke buƙatar yi shi ne sanya yadin da aka buga a cikin abin ciyar da birgima sannan a shimfiɗa shi a kan injin, a kan!
Ba wa sauran ayyukan gatsarin yanke laser hangen nesa, cikakken aiki ta atomatik:
Kyamarar tana duba zane-zanen da aka buga ta atomatik,
Cire siffar ta atomatik,
Aika bayanai ta atomatik zuwa kwamfuta da na'urar yanke laser,
Injin Laser ta atomatik daidai yankewa,
Ci gaba da ciyarwa da saukewa ta atomatik,
Maimaita aikin da ke sama ta atomatik!
Akwai hanyoyi guda biyu na duba mai wayo don zaɓa daga
Masu amfani da mu sun gaya mana cewa ta hanyar gargajiya don sarrafa zane, kuna buƙatar aƙalla mutane huɗu, aƙalla kuna buƙatar almakashi yankewa mai kauri, yanke wuka mai zafi da yankewa mai kyau da almakashi kafin dinki. A ƙarshe, saboda tutar tallan ita ce pongee na polyester, yadin saka mai lanƙwasa, yadin satin ko yadin raga, dole ne a magance gefen. Ya ɗauki awanni 8.
TheInjin yanke Laser na ganiMutum 1 ne kawai ake buƙata kuma awa 1 za a iya kammala shi. Yankewa zai iya zama daidai a cikin 0.5mm, sarrafa zafi na laser mai santsi kuma an rufe gefen ta atomatik.
lissafin kuɗi
| Kwatanta | Kudin Ma'aikata | Daidaiton Yankewa | Lokaci | Matakan yankewa | Sabon abu |
| Yankewa da hannu | Mutane 3-4 | Ƙasa | Mutane 4 Awa 8 | Matakai 3 | Fraying |
| Yanke Laser na gani | Mutum 1 | Babban | Mutum 1 Awa 1 | Mataki 1 | Santsi |
"Injinan suna maye gurbin ɗan adam", yanayin zamani
Golden Laser bisa ga "mafita sarrafa laser na dijital"
Rage samarwa da aiki ga kamfanonin gargajiya
Inganta fasahar tsari
Inganta yawan aiki da kuma ingancin samfura.
