Mashiinka xardho iyo jarista laser-ka CO2
Lambarka Moodeelka: Taxanaha JG
Hordhac:
Taxanaha JG wuxuu ka kooban yahay mashiinka laser-ka heerka gelitaanka CO2 waxaana macaamiishu u isticmaalaan jarista iyo qorista dharka, maqaarka, alwaaxa, acrylic-yada, balaastikada iyo waxyaabo kaloo badan.
- Taxane gaar ah oo mashiinno laser ah oo loogu talagalay Warshadaha kala duwan
- Hawlaha awoodda badan, waxqabadka xasilloon iyo kharash-ool ah
- Noocyo kala duwan oo ah awoodda laysarka, cabbirka sariirta iyo miisaska shaqada ikhtiyaari ah
Qaab-dhismeedyo kala duwan oo goobta shaqada ah ayaa la heli karaa
Ikhtiyaarada Goobta Shaqada
Mashiinnada Laser-ka ee taxanaha MARS waxay ku yimaadaan cabbirro kala duwan oo miis ah, oo u dhexeeya 1000mmx600mm, 1400mmx900mm, 1600mmx1000mm ilaa 1800mmx1000mm
Wattajooyinka la heli karo
Mashiinnada Laser-ka ee taxanaha MARS waxay ku qalabaysan yihiin tuubooyin laser galaas ah oo CO2 DC ah oo leh awood laysar ah oo u dhaxaysa 80 Watts, 110 Watts, 130 Watts ilaa 150 Watts.
Madaxyada Laser-ka Laba-geesoodka ah
Si kor loogu qaado wax soo saarka gooyaha laysarka, MARS Series waxay leedahay ikhtiyaar loogu talagalay laba laysar oo u oggolaanaya laba qaybood in isku mar la jaro.
Xulashooyin Dheeraad ah
Halbeegyada Farsamada
| Lambarka Moodeelka | JG-160100 | JGHY-160100 II |
| Madaxa Laydhka | Hal madax | Madax labanlaab ah |
| Goobta Shaqada | 1600mm × 1000mm | |
| Nooca laysarka | CO2 DC tuubo laser galaas ah | |
| Awoodda Laydhka | 80W / 110W / 130W / 150W | |
| Miiska Shaqada | Miiska shaqada ee malabku | |
| Nidaamka Dhaqdhaqaaqa | Matoorka tallaabada | |
| Saxnaanta Meelaynta | ±0.1mm | |
| Nidaamka Qaboojinta | Qaboojiyaha biyaha heerkulka joogtada ah | |
| Nidaamka Qiiqa | 550W / 1.1KW Marawaxad Qiiqa | |
| Nidaamka Afuufidda Hawada | Kombaresarada hawada ee yar | |
| Koronto Bixinta | AC220V ± 5% 50/60Hz | |
| Qaab Sawireed oo la Taageero | AI, BMP, PLT, DXF, DST | |
| Cabbirrada Dibadda | 2350mm (L) × 2020mm (B) × 1220mm (B) | |
| Miisaanka saafiga ah | 580KG | |
| Lambarka Moodeelka | JG-14090 | JGHY-14090 II |
| Madaxa Laydhka | Hal madax | Madax labanlaab ah |
| Goobta Shaqada | 1400mm × 900mm | |
| Nooca laysarka | CO2 DC tuubo laser galaas ah | |
| Awoodda Laydhka | 80W / 110W / 130W / 150W | |
| Miiska Shaqada | Miiska shaqada ee malabku | |
| Nidaamka Dhaqdhaqaaqa | Matoorka tallaabada | |
| Saxnaanta Meelaynta | ±0.1mm | |
| Nidaamka Qaboojinta | Qaboojiyaha biyaha heerkulka joogtada ah | |
| Nidaamka Qiiqa | 550W / 1.1KW Marawaxad Qiiqa | |
| Nidaamka Afuufidda Hawada | Kombaresarada hawada ee yar | |
| Koronto Bixinta | AC220V ± 5% 50/60Hz | |
| Qaab Sawireed oo la Taageero | AI, BMP, PLT, DXF, DST | |
| Cabbirrada Dibadda | 2200mm (L) × 1800mm (B) × 1150mm (B) | |
| Miisaanka saafiga ah | 520KG | |
| Lambarka Moodeelka | JG-10060 | JGHY-12570 II |
| Madaxa Laydhka | Hal madax | Madax labanlaab ah |
| Goobta Shaqada | 1m×0.6m | 1.25m×0.7m |
| Nooca laysarka | CO2 DC tuubo laser galaas ah | |
| Awoodda Laydhka | 80W / 110W / 130W / 150W | |
| Miiska Shaqada | Miiska shaqada ee malabku | |
| Nidaamka Dhaqdhaqaaqa | Matoorka tallaabada | |
| Saxnaanta Meelaynta | ±0.1mm | |
| Nidaamka Qaboojinta | Qaboojiyaha biyaha heerkulka joogtada ah | |
| Nidaamka Qiiqa | 550W / 1.1KW Marawaxad Qiiqa | |
| Nidaamka Afuufidda Hawada | Kombaresarada hawada ee yar | |
| Koronto Bixinta | AC220V ± 5% 50/60Hz | |
| Qaab Sawireed oo la Taageero | AI, BMP, PLT, DXF, DST | |
| Cabbirrada Dibadda | 1.7m (L)×1.66m (W)×1.27m (H) | 1.96m (L)×1.39m (W)×1.24m (H) |
| Miisaanka saafiga ah | 360KG | 400KG |
| Lambarka Moodeelka | JG13090 |
| Nooca laysarka | CO2 DC tuubo laser galaas ah |
| Awoodda Laydhka | 80W / 110W / 130W / 150W |
| Goobta Shaqada | 1300mm × 900mm |
| Miiska Shaqada | Miiska shaqada ee mindi |
| Saxnaanta Meelaynta | ±0.1mm |
| Nidaamka Dhaqdhaqaaqa | Matoorka tallaabada |
| Nidaamka Qaboojinta | Qaboojiyaha biyaha heerkulka joogtada ah |
| Nidaamka Qiiqa | 550W / 1.1KW Marawaxad Qiiqa |
| Nidaamka Afuufidda Hawada | Kombaresarada hawada ee yar |
| Koronto Bixinta | AC220V ± 5% 50/60Hz |
| Qaab Sawireed oo la Taageero | AI, BMP, PLT, DXF, DST |
| Cabbirrada Dibadda | 1950mm (L) × 1590mm (B) × 1110mm (B) |
| Miisaanka saafiga ah | 510KG |
Barnaamijka Jiilka Shanaad
Barnaamijka shatiga leh ee Goldenlaser wuxuu leeyahay shaqooyin awood badan, ku habboonaan xooggan iyo isku hallayn sare, taasoo u keenaysa isticmaalayaasha khibrad buuxda oo heer sare ah.
Interface caqli badan, shaashad taabasho midab leh oo 4.3-inji ah
Awoodda kaydinta waa 128M waxayna kaydin kartaa ilaa 80 faylal
Isticmaalka fiilada saafiga ah ama isgaarsiinta USB
Agabka iyo Warshadaha Khuseeya
SHAQO CAJIIB AH OO MASHIINADA LASAARKA CO2 'AY KA QAYB QAADEEN.
Ku habboon dharka, maqaarka, akrilik, alwaax, MDF, veneer, balaastig, EVA, xumbo, fiberglass, warqad, kartoon, caag iyo agab kale oo aan bir ahayn.
Waxaa lagu dabaqi karaa dharka iyo agabka, kabaha sare iyo lugaha, bacaha iyo boorsooyinka, agabka nadiifinta, alaabta carruurtu ku ciyaarto, xayeysiinta, farshaxanka, qurxinta, alaabta guriga, warshadaha daabacaadda iyo baakadaha, iwm.
Cabbirrada Farsamada ee Farsamo ee Laser-ka CO2
| Nooca laysarka | CO2 DC tuubo laser galaas ah |
| Awoodda Laydhka | 80W / 110W / 130W / 150W |
| Goobta Shaqada | 1000mm × 600mm, 1400mm × 900mm, 1600mm × 1000mm, 1800mm × 1000mm |
| Miiska Shaqada | Miiska shaqada ee malabku |
| Saxnaanta Meelaynta | ±0.1mm |
| Nidaamka Dhaqdhaqaaqa | Matoorka tallaabada |
| Nidaamka Qaboojinta | Qaboojiyaha biyaha heerkulka joogtada ah |
| Nidaamka Qiiqa | 550W / 1.1KW Marawaxad Qiiqa |
| Nidaamka Afuufidda Hawada | Kombaresarada hawada ee yar |
| Koronto Bixinta | AC220V ± 5% 50/60Hz |
| Qaab Sawireed oo la Taageero | AI, BMP, PLT, DXF, DST |
Soo Koobidda Nidaamyada Laser-ka Goldenlaser JG Taxanaha CO2
Ⅰ. Mashiinka Farshaxan ee Laser-ka ee lagu xardho Goynta oo leh Miiska Shaqada ee Malab
| Lambarka Moodeelka | Madaxa laysarka | Goobta shaqada |
| JG-10060 | Hal madax | 1000mm × 600mm |
| JG-13070 | Hal madax | 1300mm × 700mm |
| JGHY-12570 II | Madax labanlaab ah | 1250mm × 700mm |
| JG-13090 | Hal madax | 1300mm × 900mm |
| JG-14090 | Hal madax | 1400mm × 900mm |
| JGHY-14090 II | Madax labanlaab ah | |
| JG-160100 | Hal madax | 1600mm × 1000mm |
| JGHY-160100 II | Madax labanlaab ah | |
| JG-180100 | Hal madax | 1800mm × 1000mm |
| JGHY-180100 II | Madax labanlaab ah |
Ⅱ. Mashiinka Jarida Laser-ka oo leh suunka Gudbinta
| Lambarka Moodeelka | Madaxa laysarka | Goobta shaqada |
| JG-160100LD | Hal madax | 1600mm × 1000mm |
| JGHY-160100LD II | Madax labanlaab ah | |
| JG-14090LD | Hal madax | 1400mm × 900mm |
| JGHY-14090D II | Madax labanlaab ah | |
| JG-180100LD | Hal madax | 1800mm × 1000mm |
| JGHY-180100 II | Madax labanlaab ah | |
| JGHY-16580 IV | Afar madax | 1650mm × 800mm |
Ⅲ. Mashiinka Qorista Goynta Laser-ka oo leh Nidaamka Qaadista Miiska
| Lambarka Moodeelka | Madaxa laysarka | Goobta shaqada |
| JG-10060SG | Hal madax | 1000mm × 600mm |
| JG-13090SG | 1300mm × 900mm |
Qalabka la Isticmaali karo:
Dhar, maqaar, warqad, kartoon, alwaax, akrilik, xumbo, EVA, iwm.
Warshadaha Codsiga ugu Muhiimsan:
›Warshadaha xayeysiinta: calaamadaha xayeysiinta, calaamadaha saxanka laba-midab leh, meelaha lagu soo bandhigo akrilik, iwm.
›Warshadaha farshaxanka: farshaxanka bamboo, alwaax iyo akrilik, sanduuqyada baakadaha, koobabka, biladaha, looxyada, xaraashka sawirka, iwm.
›Warshadaha Dharka: Qalabka dharka jarista, qoorta iyo gacmaha jarista, qalabka qurxinta dharka xaraashka dharka, sameynta muunadda dharka iyo sameynta saxanka, iwm.
›Warshadaha kabaha: Maqaar, agab isku dhafan, dhar, microfiber, iwm.
›Warshadaha bacaha iyo boorsooyinka: Jarjaridda iyo xardhidda maqaar macmal ah, maqaar macmal ah iyo dhar, iwm.
Muunado xardho oo Laser ah
Fadlan la xiriir goldenlaser si aad u hesho macluumaad dheeraad ah. Jawaabtaada su'aalaha soo socda ayaa naga caawin doonta inaan kugula talinno mashiinka ugu habboon.
1. Waa maxay shuruudaha ugu muhiimsan ee aad u baahan tahay si aad u farsamayso? Goynta laysarka ama qorista laysarka (calaamadeynta) ama daloolinta laysarka?
2. Waa maxay waxyaabaha aad u baahan tahay si aad u hesho habka laser?
3. Waa maxay cabbirka iyo dhumucda agabka?
4. Ka dib marka la farsameeyo laysarka, maxaa loo isticmaali doonaa agabka? (warshadaha codsiga) / Waa maxay badeecadaada ugu dambeysa?
5. Magaca shirkaddaada, bogga internetka, iimaylka, telefoonka (WhatsApp / WeChat)?
Lambarka Moodeelka: JYBJ-12090LD
