Waxaan ku farxi lahayn inaan kugula talinno jarista laysarka ee agabka shaandhada, mashiinnadayada laysarka iyo ikhtiyaarrada gaarka ah ee loogu talagalay mashiinka shaandhada.
Mashiinka Jarida Laser-ka ee Shaandheeye
Lambarka Moodeelka: JMCCJG-350400LD
Hordhac:
Rack iyo pinion sax ah oo sarreeya. Xawaaraha jarista ilaa 1200mm/s, ACC ilaa 8000mm/s2, ilaali xasilloonida muddada dheer. Lasers-ka birta CO2 ee heerka adduunka ah ee RF. Miiska shaqada ee gudbiyaha faakuumka. Quudinta otomaatiga ah, sixitaanka xiisadda, si loogu quudiyo iyo loo jaro si joogto ah.
- Nooca laysarka:Laser-ka CO2 RF
- Awoodda laysarka:150W, 300W, 600W, 800W
- Goobta shaqada:3500mm x 4000mm
- Codsiga:Qalabka maro shaandheeye iyo dharka warshadaha goynta laser
Mashiinka Jarida Laser-ka ee Soo-saarka Maro Shaandheeye
→JMC TAXANAHA CO2 Laser magaabay - Saxnaan Sare, Degdeg ah, Aad u Otomaatig ah
Socodka farsamaynta tooska ah ee laysarka
Soo-saaristayada heerka sare ah ee mashiinnada jarista laysarka CO2, ballaarinta hawlo badan, habaynta nidaamyada quudinta otomaatiga ah iyo kala-soocidda, cilmi-baarista iyo horumarinta software-ka wax ku oolka ah... Dhammaan si loo siiyo macaamiisha hufnaan wax soo saar oo sare, habka wax soo saarka ee la hagaajiyay, badbaadinta kharashyada dhaqaale iyo kharashyada waqtiga, iyo kor u qaadista faa'iidooyinka.
Daawo Mashiinka Jarjaridda Laser-ka ee JMCCJG ee loogu talagalay Maro Shaandheeye oo Ficil ah
Faahfaahinta Degdegga ah
Halbeegga Farsamada ee ugu Muhiimsan ee Mashiinka Jarida Laser-ka ee JMCCJG350400LD Warshadaha ee CO2
| Nooca laysarka | Tuubada laysarka RF CO2 |
| Awoodda laysarka | 150W / 300W / 600W / 800W |
| Goobta Shaqada | 3.5m×4m (137"×157") |
| Miiska Shaqada | miiska shaqada ee kontoroolka faakuumka |
| Nidaamka dhaqdhaqaaqa | Gear iyo rack-ka, matoorka Servo |
| Xawaaraha jarista | 0-1,200mm/s |
| Dardargelinta | 8,000mm/s2 |
| Saxnaanta booska ku celcelinta | ±0.03mm |
| Saxnaanta booska | ±0.05mm |
| Qaabka waa la taageeraa | PLT, DXF, AI, DST, BMP |
| Koronto la'aan | AC380V±5% 50/60Hz 3 Waji |
Sare ee Mashiinka Jarjaraha Laser-ka ee Taxanaha JMC CO2
1Qaab-dhismeed si buuxda u xiran
Sariirta goynta laser-ka ee qaabka weyn leh oo leh qaab-dhismeed si buuxda u xiran si loo hubiyo in boodhka goynta uusan daadan, oo ku habboon in lagu shaqeeyo warshadda wax soo saarka degdegga ah.
Intaa waxaa dheer, gacan-qabsiga wireless-ka ee fudud ee isticmaaluhu wuxuu xaqiijin karaa hawlgalka fog.
2Gees iyo Rack oo wata
Saxnaan sare lehWadista qalabka iyo raafkanidaam. Xawaare sare. Xawaaraha jarista ilaa 1200mm/s, dardargelinta 8000mm/s2, waxayna ilaalin kartaa xasilloonida muddada dheer.
- Heer sare oo sax ah iyo ku celcelin.
- Hubi tayada jarista oo aad u fiican.
- Waara oo awood badan. Wax soo saarkaaga 24/7 saac.
- Muddada adeegga waa in ka badan 10 sano.
3Nidaamka quudinta
Qeexitaanka otomaatiga ah:
- Ballaca hal-roodle wuxuu u dhexeeyaa 1.6 mitir ilaa 8 mitir; dhexroorka ugu badan ee duubku waa 1 mitir; Miisaan la awoodi karo ilaa 500 KG
- Quudinta otomaatiga ah ee ku-darka maroojiyaha; Sixitaanka leexashada midig iyo bidix; Meelaynta walxaha iyadoo loo marayo xakamaynta geeska
Quudinta xiisadda saxda ah
Ma jiro quudiye xiisadeed oo si fudud u qalloocin doona kala duwanaanshaha habka quudinta, taasoo keentay in shaqada sixitaanka ee caadiga ah ay kordho;
Quudiyaha xiisaddaoo ah mid dhammaystiran oo ku xiran labada dhinac ee maaddada isla waqtigaas, iyadoo si toos ah loogu jiidayo gaarsiinta maro iyadoo la adeegsanayo duub, dhammaan geeddi-socodka oo leh xiisad, waxay noqon doontaa sixitaan qumman iyo saxnaanta quudinta.
Quudinta isku-dhafan ee X-dhidibka
4Qaybaha qiiqa iyo shaandhaynta
Faa'iidooyinka
• Had iyo jeer gaarsii tayada ugu sarreysa ee jarista
• Agab kala duwan ayaa khuseeya miisaska shaqada ee kala duwan
• Si madax-bannaan u xakameeya soo saarista kor ama hoos
• Cadaadiska nuugista miiska oo dhan
• Hubi tayada hawada ugu fiican deegaanka wax soo saarka
5Nidaamyada calaamadaynta
Sida waafaqsan shuruudaha macaamiisha, qalab daabace ah oo aan taabasho lahayn iyo qalab qalin calaamadeysan ayaa lagu rakibi karaa madaxa laysarka si loo calaamadeeyo walxaha shaandhada, taas oo ku habboon tolida dambe.
Hawlaha daabacaha khadka-jet:
1. Calaamadee tirooyinka oo si sax ah u jar geesaha
2. Lambarka oo la jaray
Hawl-wadeennadu waxay calaamadayn karaan off-cut iyagoo adeegsanaya macluumaad sida cabbirka off-cut iyo magaca howlgalka.
3. Calaamadaynta aan taabashada lahayn
Calaamadaynta aan taabashada lahayn ayaa ah doorashada ugu fiican ee tolida. Khadadka goobta saxda ah waxay shaqada xigta ka dhigaan mid si fudud loo samayn karo.
6Meelaha la jari karo ee la habeyn karo
2300mm × 2300mm (90.5in × 90.5in), 2500mm × 3000mm (98.4in × 118in), 3000mm × 3000mm (118in × 118in), 3500mm × 4000mm (137.7in × 157.4in) Ama ikhtiyaarro kale. Meesha ugu weyn ee shaqada waa ilaa 3200mm × 12000mm (126in × 472.4in)
Baadh macluumaad dheeraad ah oo ku saabsan xalalka laysarka ee shaandheeyayaasha?
Halbeegga Farsamada ee Mashiinka Jarida Laser-ka CO2
| Nooca laysarka | Tuubada laysarka RF CO2 |
| Awoodda laysarka | 150W / 300W / 600W / 800W |
| Goobta Jarida | 3.5m×4m (137″×157″) |
| Miiska Shaqada | miiska shaqada ee kontoroolka faakuumka |
| Nidaamka dhaqdhaqaaqa | Gear iyo rack-ka, matoorka Servo |
| Xawaaraha jarista | 0-1,200mm/s |
| Dardargelinta | 8,000mm/s2 |
| Nidaamka saliidaynta | Nidaamka saliidaynta otomaatiga ah |
| Nidaamka soo saarista qiiqa | Tuubo isku xiran oo khaas ah oo leh afuufayaal N centrifugal ah |
| Nidaamka qaboojinta | Nidaamka qaboojiyaha biyaha asalka ah ee Processional |
| Madaxa laysarka | Madaxa goynta laser CO2 ee Processional |
| Xakamaynta | Nidaamka xakamaynta ee offline |
| Saxnaanta booska ku celcelinta | ±0.03mm |
| Saxnaanta booska | ±0.05mm |
| Kerf yar | 0.5 ~ 0.05mm (iyadoo ku xiran maaddada) |
| Awood guud | ≤25KW |
| Qaabka waa la taageeraa | PLT, DXF, AI, DST, BMP |
| Koronto la'aan | AC380V±5% 50/60Hz 3 Waji |
| Shahaadada | ROHS, CE, FDA |
| Xulashooyinka | Quudiyaha otomaatiga ah, Meelaynta dhibcaha cas, Nidaamka calaamadaynta, nidaamka Galvo, madaxyo labanlaab ah, kamaradda CCD |
Qaybaha ugu Muhiimsan iyo Qaybaha
| Magaca Maqaalka | Tirada | Asal ahaan |
| Tuubada laysarka | 1 qaybood | Rofin (Jarmalka) / Isku xiran (Mareykanka) / Synrad (Mareykanka) |
| Muraayadaha diiradda saaraya | 1 xabbo | II IV USA |
| Matoorka Servo iyo darawalka | 4 qaybood | YASKAWA (Japan) |
| Rack iyo pinion | 1 qaybood | Atlanta |
| Madaxa laser diiradda firfircoon | 1 qaybood | Qalabka Raytools |
| Qalab yareeya qalabka | 3 qaybood | Alfa |
| Nidaamka xakamaynta | 1 qaybood | GoldenLaser |
| Hagaha Dahaarka | 1 qaybood | Rexroth |
| Nidaamka saliidaynta otomaatiga ah | 1 qaybood | GoldenLaser |
| Qaboojiyaha biyaha | 1 qaybood | GoldenLaser |
Mashiinka Jarida Laser-ka Taxanaha JMC Moodooyinka Lagu Taliyay
→JMCCJG-230230LD. Goobta Shaqada 2300mmX2300mm (90.5 inji × 90.5 inji) Awoodda laysarka: 150W / 300W / 600W / 800W CO2 RF Laser
→JMCCJG-250300LD. Goobta Shaqada 2500mm×3000mm (98.4 inji×118 inji) Awoodda laysarka: 150W/300W/600W/800W CO2 RF Laser
→JMCCJG-300300LD. Goobta Shaqada 3000mmX3000mm (118 inji×118 inji) Awoodda laysarka: 150W / 300W / 600W / 800W CO2 RF Laser … …
Qalabka Codsiga
Dharka sifeynta, maro shaandheeye, faybar galaas ah, maro aan tolnayn, warqad, xumbo, cudbi, polypropylene, polyester, PTFE, dharka polyamide, dharka polymer-ka ee synthetic-ga ah, nayloon iyo dharka kale ee warshadaha.
Muunado ka mid ah Warbaahinta Shaandhada Goynta Laser-ka
<Fiiri muunado badan oo ka mid ah walxaha shaandhada goynta laysarka
Fadlan la xiriir goldenlaser si aad u hesho macluumaad dheeraad ah. Jawaabtaada su'aalaha soo socda ayaa naga caawin doonta inaan kugula talinno mashiinka ugu habboon.
1. Waa maxay shuruudaha ugu muhiimsan ee aad u baahan tahay si aad u farsamayso? Goynta laysarka ama qorista laysarka (calaamadeynta) ama daloolinta laysarka?
2. Waa maxay waxyaabaha aad u baahan tahay si aad u hesho habka laser?
3. Waa maxay cabbirka iyo dhumucda agabka?
4. Ka dib marka la farsameeyo laysarka, maxaa loo isticmaali doonaa agabka? (warshadaha codsiga) / Waa maxay badeecadaada ugu dambeysa?
Halkan ku qor fariintaada oo noo soo dir
Lambarka Moodeelka: JMCCJG-250300LD
Mashiinka Jarida Laser-ka ee CO2 ee Farsamada Dharka
Lambarka Moodeelka: JMCZJJG(3D)-250300LD
Mashiinka Jarida Laser-ka ee Nalalka Dharka
Lambarka Moodeelka: ZJ(3D)-15050LD
